Cupcake Momma

The holiday lights do not just come to life- unless you happen to have a group of elves that you can call to you (not everyone, unfortunately, is as lucky as I am). Christmas lights do not just happen to be installed by picking up a box of tangled cords that you have in the garage. When you are planning on making your display sparkle brightly and the neighbors green with envy, then it is a good idea to make it methodically. This is a step-by-step procedure to make certain that your lighting experience over the holidays is festive as the outcome. Check this web site for more information!

Plan Big, Think Safe

Think over where you want your lights, first, before you begin. It could be lightening up the roofline, or wrapping tree trunks, or giving bushes some twinkles, either way, walk around and see what the final appearance will be like in the evening light. Take notes of places that will be sparkling and shun places that may not contribute to the beauty. With a measuring tape in hand, write the necessary lengths- do not just eye it! By making sure that you have the correct measurements at the beginning of the project, you may have avoided those exasperating moments of uh-oh when you were halfway through the installation.

Gather the Right Supplies

Christmas lights do not require a big budget to buy but quality is definitely important. Use LED lights with an outdoor rating and they are also weatherproof and can last up to 10 times longer than the conventional bulbs that consume approximately 75 percent less energy. You will wish also to have additional clips and hooks, you can never have too many. And, as my case is with extension cords, please ensure that you use extension cords that have been specifically tailored to be used outdoors to prevent any electrical accidents.

Inspect Your Lights

Check each strand of lights and ladders before you begin to mount ladders and lights. You can be surprised even with new lights having wrong bulbs or wires. Set them up and look very closely at every strand to see that there is not any trouble with it–this is very easily done when you are on the ground with your feet safely in rest, not up a ladder that is swaying with your weight. Should you have a burned bulb, you should have spares in most sets of lights, now is the time to change them.

Plan Your Power

It is important to use safe power to power up your display. Only plug into one outlet at a time and strive to use no more than 1400 watts on each circuit to prevent breaker tripping or even a melted wire. The trick to it would be to keep all the plug-ins above the ground- do not leave them at places where snow, puddles or pets that may be curious can tamper with them. To ensure an additional caution, suspend cords on walks to avoid any form of trip.

These steps will make you half way to a Christmas light show that not only shines brightly, but also has a safe and trouble-free installation. Pleasurable to the process and the celebratory radiance that ensues!